top of page

ARP flywheel bolt set: Duratec HE I4 16v


ARP Flywheel Bolts - OEM flywheel bolts can fail when subjected to large amounts of torque and general abuse so it is important to upgrade them in a performance engine. Fortunately the experts at ARP have developed bolts that are far superior to OEM hardware. ARP's premium grade Pro Series bolts have a 190,000 psi tensile strength. They are forged from aerospace alloy and heat-treated prior to thread rolling and machining.

Ford Duratec HE I4 (4 cylinder)
  • Ford Fiesta Mk6 ST150 2.0 2005-2008
  • Ford Focus Mk2 1.8 2005-2011
  • Ford Focus Mk2 2.0 2005-2011
  • Ford Mondeo Mk3 1.8 2000-2007
  • Ford Mondeo Mk3 2.0 2000-2007
  • Ford Mondeo Mk4 2.0 2007-2014
Installation instructions:

DO NOT USE ANY WASHERS with ARP flywheel bolts. They are designed to be installed without them. Note: ARP will NOT be responsible for any failures resulting from using a washer with this kit.

Make sure there is an adequate chamfer around the bolt holes on the flywheel to clear the radius under the head of the bolt.

Lubricate the threads of the bolt with LOCTITE 242 and the under head of the bolt with ARP ULTRA-TORQUE FASTENER ASSEMBLY LUBRICANT. Then install the flywheel onto the crankshaft and tighten the bolts hand tight.

Using an alternating or criss-cross pattern, torque the bolts to 95ft lbs using the lubricants specified above.



ARP flywheel bolt set: Duratec HE I4 16v - DFLYWHEELBOLTSCOS

    bottom of page